Honeycomb activated carbon What is the reason for dry cracking? After laboratory discussion, the filter material discussed the monotonous method, mud liquid liquid ratio, and the effect of mud and binder aging time on honeycomb Activated carbon Effect of dry cracks. The results show that the microwave monotone yield is higher, and the microwave monotone time is 16 min. The adhesive is the main factor affecting the honeycomb cracking.

Sepiolite with layered structure and cellulose ether with thermal gel properties are better adhesives for activated carbon honeycomb; The full water absorption of activated carbon material determines a better liquid-solid mass ratio, which is 0.91; Mud aging is conducive to improving the output value of monotonous products and better mud. The aging time is 20 hours.

Honeycomb activated carbon can be directly used or put into purification cabinet and adsorption bed for use. If the concentration of waste gas is high and the use, characteristics and parameters of discharged honeycomb activated carbon are large, two purification cabinets and adsorption bed can be used alternatively. In the process of application, use, characteristics and parameters of honeycomb activated carbon to prevent excessive temperature.

If the temperature is too high, the use, characteristics and parameters of adsorption honeycomb activated carbon will decline, and the use, characteristics and parameters of adsorption honeycomb activated carbon will decline with the temperature rising; The use, characteristics, parameters and oil mist of honeycomb activated carbon with high dust content shall be prevented together, because the tar dust mist will block the micropores of activated carbon, and the use, characteristics, parameters of honeycomb activated carbon plus resistance will reduce the adsorption effect.