You don't know Honeycomb zeolite molecular sieve Advantages of

Honeycomb zeolite It has uniform micropores, whose pore size is equivalent to that of ordinary molecules. It is an inorganic microporous material composed of SIO2, AL2O and alkaline metals or alkaline earth metals. Its inner pore volume accounts for 40-50% of the total volume, and its specific surface area is 300-1000m2/g. It has the characteristics of high temperature resistance, non flammability, good thermal stability and hydrothermal stability. Its pore size below 2nm is microporous Zeolite molecular sieve , 2-50nm are mesoporous zeolite molecular sieves, and above 50nm are macroporous zeolite molecular sieves. According to the different components of organic waste gas, molecular sieve materials with different properties and pore sizes shall be configured to achieve targeted and selective treatment of organic waste gas to meet the design requirements and emission standards.

1. Strong adsorption selectivity:

The product is configured with molecular sieve materials with different properties and pore sizes according to different components of organic waste gas, so as to achieve targeted and selective treatment of organic waste gas, meet the design requirements and emission standards.

2. Strong adsorption capacity:

Even if the gas composition concentration is very low at mg level, it still has the adsorption capacity. Compared with peers Activated carbon Increase efficiency by 50%.

3. Wide adaptability of adsorption temperature:

At higher temperatures, the adsorption capacity of molecular sieves is still large, while other adsorbents are greatly affected by temperature, so the adsorption capacity of molecular sieves is large at the same temperature.

4. Good regeneration temperature resistance:

After adsorption and concentration by molecular sieve, the concentration ratio of pollutants can reach 15 to 20 times, and the concentrated waste gas can be condensed for recovery or high-temperature combustion treatment as required.

5. High strength:

Products coming to the company use special framework materials to make the positive pressure strength of honeycomb zeolite reach more than 3Mpa, which can reduce damage during transportation and installation.