Honeycomb zeolite molecular sieve ， Honeycomb zeolite molecular sieve Do you really understand?

Concentrated zeolite by VOC adsorption

1. Product application industry

Honeycomb molecular sieves are mainly used in the environmental protection industry, VOCs adsorption and concentration. The application industries include: automobile spraying industry, printing industry, pharmaceutical industry, coating industry, electronics industry, coal chemical industry, etc., which can adsorb benzene series, such as toluene, xylene, and trimethylbenzene; Esters, such as ethyl acetate; Alkanes; Alcohols; Ammonia; hydrogen sulfide; Formaldehyde and other VOCs.

At present, our company specializes in the adsorption and removal of VOCS gas in the air treatment of environmental protection industry Zeolite molecular sieve Adsorbent, has a lot of application achievements. Different zeolite molecular sieves will be used as raw materials for different VOCs gas adsorption, including Z type, Y type and other hydrophobic zeolite molecular sieve powders.

Compared with honeycomb zeolite molecular sieves from other domestic manufacturers, our products have the following advantages:

Different processes: our company's Honeycomb zeolite molecular sieve It is extruded (that is, the active ingredient content is more than 80%), and other manufacturers Honeycomb zeolite It is a coating process (the content of active ingredients is about 20-30%), so the adsorption capacity of VOCs in our products is larger than that of other manufacturers.

The raw powder is different: our raw materials are all made of hydrophobic molecular sieve powder, while other manufacturers use hydrophilic molecular sieve powder. Therefore, our products do not have high requirements on the relative specific humidity of the environment. They can be used when the relative humidity is below 80%, without affecting the adsorption capacity.

2. Production process of honeycomb molecular sieve

Extrusion process

3. Performance index

Specification: 100 * 100 * 50

Strength: ≥ 0.5MPA

Removal rate: ≥ 90%

Airspeed: 5000-8000h-1

Inlet VOCs concentration: ≤ 1000mg/m3