Columnar activated carbon Hubei The adsorption and concentration technology of zeolite runner is highly praised by enterprises because of its high efficiency and energy saving. Its changeable working environment and low cost ensure the popularization and application of zeolite runner in industry. How to select a zeolite runner with stable operation and high efficiency? The zeolite content of the zeolite runner is proportional to the adsorption concentration efficiency. Therefore, when choosing to purchase the zeolite runner, the matching zeolite content should be selected in combination with the emission concentration of the enterprise's exhaust gas pollutants. Zeolites with large specific surface area shall be purchased for good hydrophobicity. Select the inspection equipment to test the hydrophobicity of the equipment. When the air humidity is greater than 60%, calibrate the equipment. If the equipment is blocked and the machine works abnormally, it indicates that the equipment has poor hydrophobicity, and you should carefully consider whether to purchase the equipment. The factors affecting the purification efficiency of zeolite due to high desorption efficiency are: absorption on the one hand and desorption function on the other. Columnar activated carbon purchase If the waste gas adsorbed on the runner cannot be completely desorbed, the runner will become saturated after a long time, which will affect the adsorption efficiency of the zeolite runner and directly affect the service life of the zeolite over time.

The zeolite wheel adsorption purification device is a gas purification device that can continuously perform adsorption and desorption operations. Columnar activated carbon purchase The two sides of the zeolite runner are divided into three areas by special sealing devices: adsorption area, desorption (regeneration) area and cooling area. The working process of the system is as follows: the zeolite runner rotates continuously at a low speed and circulates through the adsorption area, desorption (regeneration) area and cooling area; When the exhaust gas with low concentration and large air volume continuously passes through the adsorption area of the runner, VOCs in the exhaust gas are adsorbed by the zeolite of the runner, and the gas purified by adsorption is directly discharged; The organic solvent adsorbed by the wheel is sent to the desorption (regeneration) area along with the rotation of the wheel, and then continuously passes through the desorption area with small amount of hot air, purchase Hubei VOCs adsorbed on the runner are thermally desorbed in the desorption area to achieve regeneration, and VOCs waste gas is discharged with hot air; After the runner is transferred to the cooling area for cooling, it can be re adsorbed. With the continuous rotation of the runner, adsorption, desorption and cooling cycles are carried out to ensure the continuous and stable operation of waste gas treatment

Columnar activated carbon purchase The high reliability makes users no longer worry about unexpected shutdown, which is the confidence brought by UOP molecular sieve. Traditional molecular sieves can be used as desiccants, adsorbents and ion exchangers. UOP also provides high silicon zeolite series molecular sieves for non-traditional applications, including molecular sieves to remove organisms that affect the taste of food and drinks or cause odor. Zeolite molecular sieves have crystal structure and characteristics, the surface is a solid skeleton, and the internal holes can play the role of adsorption molecules. There are channels between the holes to connect with each other, and molecules pass through the channels. Due to the crystalline nature of the pores, the pore size distribution of the molecular sieve is very uniform. Molecular sieves selectively adsorb molecules according to the size of holes in their crystals, that is, they adsorb molecules of a certain size and repel molecules of larger substances, so they are vividly called "molecular sieves". The adsorption or repulsion function of molecular sieves is affected by the molecular electricity. Synthetic zeolite has the special function of selective adsorption according to the size and polarity of molecules, so it can dry or purify gas or liquid, which is also the basis of molecular sieve for separation. Columnar activated carbon Hubei Synthetic zeolite can meet the extensive demand of industry for adsorption and selective products, and is also widely used in industrial separation to synthesize zeolite molecular sieves. Advantages of UOP molecular sieve

Columnar activated carbon purchase Microporous molecular sieves with molecular pore size below 2 nm and mesoporous molecular sieves with molecular pore size between 2-50 nm (50 nm The above are macroporous molecular sieves), mesoporous molecular sieves have high specific surface area, regular and orderly pore structure, narrow pore size distribution, continuous and adjustable pore size and other characteristics, which make it play an important role in the adsorption, separation and catalytic reaction of macromolecules that are difficult for many microporous molecular sieves to complete. Therefore, molecular sieve materials with different properties and pore sizes shall be configured according to the different components of organic waste gas during selection, so as to achieve targeted organic waste gas treatment, meet the design requirements and emission standards. The main material of honeycomb zeolite adsorbent is natural zeolite. The manufacturer of zeolite is composed of silica Inorganic microporous material composed of al_2o_3 and alkaline metal or alkaline earth metal, with inner pore volume accounting for 40-50% of the total volume and specific surface area of 100-500 m2/g, has the characteristics of high temperature resistance, non flammability, good thermal stability and hydrothermal stability. It is an efficient molecular sieve carrier with good adsorption performance, no secondary pollution, and high temperature regeneration. Compared with honeycomb activated carbon, its performance is about 25% of its efficiency Columnar activated carbon Hubei However, it is widely used in the fields of adsorption, separation, catalysis and environment due to its high temperature resistance and low ignition resistance. It is more suitable for the treatment of organic waste gas with large air volume and low concentration.